Turtle Beach Ear Force XP500 User Manual - Page 10

Xbox 360® Wired Chat Setup* (optional) In cases where the XBA Bluetooth Chat Adapter cannot be used, such as with third-party controllers and the Xbox Chat Pad, and optional talkback cable is available for a wired chat connection between the headset and controller. 1. With the headset powered on, place the XP500 in Wired Mode by quickly pressing the power button twice. The headset will announce which mode it's in. 2. Insert the right angle plug into the headphone jack on the Xbox 360 controller. 3. Insert straight plug into the controller jack on the left ear cup of the headset. *The Xbox 360 Talkback Cable is required for this setup and is sold separately at www.TurtleBeach.com. Configure Xbox 360 Settings 1. In the Xbox 360 System Settings, select: Settings > Audio > Accessory Settings > Audio Device Settings Set the "Digital Output" to "Dolby Digital 5.1" Digital Output Digital Stereo Current Setting Dolby Digital Dolby Digital 5.1 Dolby Digital 5.1 with WMA Pro Choose the digital output type for your system. This setting only applies to optical digital and HDMI audio outputs. 2. In the Xbox 360 System Settings, select: Settings > Preferences > Voice Set the "Voice/Game Volume" to 10 and set the "Voice Output" to "Play Through Headset" Select Back 15 PS3TM Chat Setup When using the XP500 with a PS3, the Bluetooth is used for PSN™ chat. Follow these instructions to pair the Bluetooth. 0 12/14 12:15 PM Register to manage Bluetooth® devices such as headsets, keyboards and mouse devices. 1. With the XP500 Bluetooth powered OFF, go in the PS3 Menu and select "Settings" > "Accessory Settings" > "Manage Bluetooth Devices" 2. If you have never used a Bluetooth device or have deleted any profiles from other devices previously used with your console, the PS3 prompt will ask if you wish to register a device. Choose "Yes" to start scanning. If any other Bluetooth devices have previously been paired with your console they will appear in a list. Choose "Start Scanning" at the bottom of the screen. 3. On the XP500, press and hold the BT MFB for 5 seconds until the flashing LED changes from blue to red - then release the button. A voice prompt in the earpiece will indicate that the XP500 is in pairing mode. 4. When the PS3 is finished scanning, it will prompt you to select the Bluetooth device. Select "TURTLE BEACH XP500" from the list. 5. Enter "0000" as the Pass Key and select "OK". A voice prompt in the earpiece will indicate that the XP500 is now paired with your PS3. Configure PS3 System Settings Audio Device Settings Microphone Level 3 Input Device TURTLE BEACH XP500 Output Device TURTLE BEACH XP500 OK X Enter Back 1. Place the XP500 in Wireless Chat Mode mode by quickly pressing the power button twice. 2. In the PS3 Menu, select "Settings" > "Sound Settings" > "Audio Output Settings" > Optical Digital > Dolby Digital 5.1 3. In the PS3 Menu, select "Settings" > "Accessory Settings" > "Audio Device Settings" > set the "Input" and "Output" to "TURTLE BEACH XP500" 16