Turtle Beach Ear Force XP500 User Manual - Page 4

XP500 Headset - Left Ear Cup Controls 1 2 6 3 5 4 3 1. Main Power Button with LED Powering ON: Press and hold until the headset announces "Powering On". Powering OFF: Press and hold until the headset announces "Powering Off". Automatic Power OFF: If the headset doesn't detect any audio for more than 5 minutes, it will automatically shut down to conserve battery power. Wireless/Wired Mode: Press the Power Button twice quickly to switch between wireless and wired modes. The headset will announce the selected mode. (See "Presets" on pg. 21 for further details) Power Button LED Indicator: Flashes once per second when paired to the Transmitter and flashes twice per second when not paired. (See "Pairing the Headset and Transmitter" on pg. 11 for further details) Pairing Mode: Initiates pairing mode between the headset and transmitter. From a powered down state, press and hold the power button for 6 seconds. The LED will begin to flash rapidly. 2. Removable Microphone with Adjustable Boom The microphone can be removed from the headset when chat is not required by detaching it from the boom. (See "Setup" on pg. 13 for further details) 3. Game Volume Control Turn to adjust game volume level. 4. Presets Button Press to select one of eight (8) alternate game audio presets. (See "Presets" on pg. 21 for further details) 5. Xbox 360 Controller Jack (for optional wired chat setup) Insert the straight connector on the Xbox 360 Talkback Cable (sold separately) into this jack when using the XP500 with an Xbox 360 for wired chat. 6. USB Input Allows for headset programming by connecting to a USB port on a PC with the included USB cable. (See the "Presets" on pg. 21 for further details) 4