Turtle Beach Ear Force XP500 User Manual - Page 9

Setup (con't) 3. Insert the Headset Batteries. 3 Right Ear Cup: To remove the battery cover, slide downward. NOTE: Be sure to insert batteries as shown. 4. Insert the Mic Boom. 5. Turn on the headset by pressing and holding the power button until it turns solid, then release. 6. Turn on the Transmitter by pressing the power button. 4 5 Insert the boom so that the holes in the mic casing and the marker on the jack are facing your mouth. 6 13 Xbox 360® Wireless Chat Setup Connecting the XBA Bluetooth Chat Adapter* 1. Place the headset in "Wireless Chat Mode" by quickly pressing the Power button twice. The headset will announce which mode it's in. 2. Power on the Xbox 360 controller and plug the XBA into the controller headset jack. 3. With the XBA powered off, press and hold the button on the XBA for 4 seconds to enter Bluetooth pairing mode. The LED will begin to blink rapidly. 4. With the XP500 powered-on, press and hold the BT MFB button on the right ear cup for about 5 seconds to power on the Bluetooth. If this the first time you've powered-on the headset, the Bluetooth will automatically be in pairing mode. If its not the first time the headset has been powered-on, make sure the Bluetooth is powered-off and press and hold the BT MFB button for about 5 seconds until you hear "Pairing Bluetooth" in the headset. After a few seconds, the XBA and the XP500 will be paired and the headset will announce "Bluetooth Paired". The XBA will automatically pair itself to the headset each time it's powered on so you will only need to complete the pairing process during initial setup. XBA Functions Function Button Press LED Power ON Single 1 blink / sec Power OFF Hold 3 secs OFF Mic MUTE Double Solid ON Mic UNMUTE Double 1 blink / sec Pairing Mode Hold 4 secs (not paired 2 blinks / sec (paired 1 blink / sec *The XBA adapter is not compatible with the Xbox 360 chat pad and may not be compatible with third party controllers. 14