URC MRF-200 Owners Manual - Page 10

MRF-200 BASE STATION Front Blaster Overload A few models of audio/video components can be OVERLOADED by the Front Blaster. If you are having intermittent or inconsistent results with a particular component, try repositioning the MRF-200 and facing the Front Blaster in a different direction. If this improves the situation but is impractical, it may be necessary to utilize the self-adhesive flashers only and follow the steps below to Disable the Front Blaster. This will limit the number of components your MRF-200 can control to six. If you have more than six components you can purchase an additional MRF-200 (available as an accessory alone from your Home Theater Master dealer). Do not change the receiver ID# (use the same ID # as the first unit) then follow the steps on the following pages: Disabling the Front Blaster - Step by Step Plug the MX-800 back into the PC. Open your saved configuration and follow these steps to turn off the front blaster: Step 1 - Open the RF Setup Window The RF Setup window opens after selecting RF Control from the Program Menu. Step 2 - Reveal the Receiver settings Extend the RF Setup window by clicking on the Receivers button. Step 3 - Turn off the Front Blaster Click on the cell in the IR Blaster column. A list box will appear. Select OFF from the list. Next, click on OK to apply your change. Step 4 - Save and Download to the MX-800 SAVE your changes using File|Save and DOWNLOAD to the MX-800. Page 7