URC MRF-200 Owners Manual - Page 13

MRF-200 BASE STATION Click on the "cell" for the first identical TV, by crossing the device row with the Signals column. Signal Column TV1 Device Row Select RF from the three options shown for EACH of the identical TV's. You may leave the other components of the system set to IR & RF. Step 7 - Adjust the Flashers For Each of the Identical Devices The RF Setup window enables you to adjust which Flashers output by the MX800 for each device individually, by clicking on the intersection of a row and a column and then selecting 1-6 from the seven options shown in the pull down list box. Flasher Column Click on the "cell" for the first identical TV, by crossing the device row with the Flashers column. TV1 Device Row Select the correct Flasher (refer to your connection notes) for EACH of the identical TV's. You may leave the other components of the system set to ALL. Step 8 - Apply, Save, Download and Test First click on the OK button of the RF Setup window. Next, Save your work. Finally, download to your MX-800. When you select TV1 with your MX-800, commands are only sent to it. Likewise for the rest of your identical TV's! Page 10