URC THZ-100 Owners Manual - Page 6

THZ-100 THERMOSTAT Installing Your THZ-100 Thermostat Adding an optional wired sensor can be a benefit if the thermostat location is not the optimal location for temperature measurement, or if temperature averaging is desired. • A wired sensor can be connected to the S+ and S- terminals on the back of the unit • This can be added to any of the wiring options detailed in the next pages For optimum performance, mount the THZ-100 thermostat and/or remote sensor • In an open living area where there is good air circulation • On an inside wall • Away from outside doors or windows • At a height about 5 feet from the floor Avoid installing the THZ-100 thermostat and/or remote sensor • In direct sunlight • Above radiators or air vents • Near fans or portable heating units • Near lamps or other incandescent lighting • Near other heat generating electric appliances such as televisions, audio video equipment, refrigerators, freezers, ovens, cooktops, etc. Other precautions when installing the THZ-100 thermostat and/or remote sensor • Make sure the cutout for the HVAC wiring is no larger than needed to make proper connections to the thermostat • If there is a large air gap in the cutout for the HVAC wiring, insulate around the wire and close off the air gap • Make sure the air vents in the THZ-100 thermostat and/or remote sensor are clear of dirt, dust, or any construction material. Page 2