Uniden BC245XLT English Owners Manual - Page 43
Setting the Squelch 39, Programming Trunking Frequencies 39, Trunking Programming mode.
View all Uniden BC245XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting the Squelch Since Squelch is automatically adjusted in trunking mode, it isn't necessary to manually adjust the squelch control while trunk tracking. However, the squelch setting you select before you begin trunk tracking can affect how fast your scanner acquires the data channel, and, in some instances, the squelch setting can prevent your scanner from acquiring the data channel at all. Set SQUELCH in this position before selecting a trunking bank. Note: You can change this recommended setting, if necessary, to provide better performance in your area. Programming Trunking Frequencies Before you start programming your scanner to track a trunked system, consider the following: n You can only program one trunking system in each bank of your scanner. n Trunking frequencies must be entered while in the Trunking Programming mode. n If you're in the Trunking Programming mode, you cannot select channels in other banks. For example, if you are programming Bank 4, you can only select channels 91-120 with the or keys. n IMPORTANT: If you are programming an EDACS® trunked system, you must enter the frequencies in a specific order. Check the frequency guide included with the radio and the listed web sites for details. 39