Uniden BC245XLT English Owners Manual - Page 81
SVC Scanning 32
View all Uniden BC245XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
If you experience difficulty while in TrunkTracker™ mode, try the following steps. Problem Suggestion Scanner wont track the trunked system. 1. May not be a system which can be tracked by your scanner. 2. Missing the data frequency. 3. Change to a Type 1 Scanner setup. Review Fleet Map Programming on page 56. Scanner wont stop during Scan List mode. 1. No IDs have been programmed. 2. The IDs you have stored are not active. Scanner will not acquire data channel. 1. Adjust the squelch for trunking mode. See page 39. 2. Missing the frequency used for the data channel. Check your frequency list. Missing replies to conversations. 1. Change to a Type 1 Scanner setup. Review Fleet Map Programming on page 56. 2. Try another Preset Fleet Map or Program your own Fleet Map. 3. Check to see that all of the systems frequencies have been entered. Channel Activity Indicators are flashing but no sound is heard. 1. May be a private or telephone interconnect call, which are intentionally blocked by your scanner. 2. The ID in your display is not active. Scanner not tracking an EDACS system properly. 1. Logical channel numbers ( frequencies) for the system are not programmed in the correct order. Check frequency resources and reprogram. 2. Not all frequencies for the system are programmed. Check frequency resources. If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800) 297-1023. If you have internet access, you can visit www.uniden.com or www.trunktracker.com or www.bearcat1.com/free.htm for additional information. 77