Uniden BC245XLT English Owners Manual - Page 69
Scanning 20, DATA IDLE TIME OUT
View all Uniden BC245XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
6. If the connection is successful, the scanner starts frequency downloading. 7. donE will be displayed when your downloading is completed. 8. To start the scanner, you must turn the unit off/on. If downloading is not successful, one of the following error messages will appear. Err01: MODEM ACCESS ERROR Err02: NO CARRIER Err03: TELEPHONE LINE BUSY Err04: NO ANSWER Err05: SERVER CONNECT ERROR Err06: DATA IDLE TIME OUT NOTE: If the scanner does not display LoAd (see step 6), disconnect the access by pressing . Then, make sure the modem is connected properly, and try again. NOTE: The number preprogrammed into your scanner for downloading frequencies is 1-900-225-4822. There is a $0.99 per minute charge for using the SmartScan database. The frequencies in the SmartScan database are updated, at a minimum, every 6 to 12 months. To get current frequencies, as well as special /sporting event frequencies, regularly update your scanner by using SmartScan. NOTE: If you are unable to dial a "900" number, check with your local phone company to find out if you have a "900" block on your phone line. This will prevent you from dialing to the server. 65