Uniden BC350C English Owners Manual - Page 12
Installing the BC350C - cigarette lighter cords
UPC - 064258650332
View all Uniden BC350C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
UB317Z (BC350C) 0916 9/16/03 12:42 PM Page 8 Installing the BC350C For Home Use (Desktop Installation) 1. Insert the DC plug end of the AC Adapter into the DC 13.8V jack on the rear panel. 2. Plug the AC Adapter into a standard 120V AC wall outlet. 3. Plug the Telescoping Antenna into the ANT connector. Extend the antenna to its full height. For frequencies higher than 406 MHz, shortening the antenna may improve the reception. 4. Use the desktop stand for a better viewing and operating angle. Helpful Hints • If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source. • If you are operating the scanner in a fringe area or need to improve reception, use an optional antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store.) • If the optional antenna has no cable, use 50-70 ohm coaxial cable for lead-in. A mating plug may be necessary for the optional antennas. For Mobile Use (In-Car Installation) Installation for Temporary Use: A Cigarette Lighter Power Cord is provided for easy, temporary installation. Warning: Do not use the cigarette lighter power cord in a positive ground vehicle. Plug one end of the Cigarette Lighter Power Cord into the cigarette lighter jack and the other end into the DC 13.8V jack on the back of the scanner. 8