Uniden BC350C English Owners Manual - Page 17

UB317Z (BC350C) 0916 9/16/03 12:42 PM Page 13 Press this key as many times as it takes to find the band you want to search. IMPORTANT: This key has a very important secondary function. In Program Mode, you can press [BAND] to leave this mode. [PROG] KEY This key initiates and completes programming. It is active whenever a steady frequency appears on the display. Press [PROG] to start Programming Mode. " CH " appears and blinks, indicating you are in Programming Mode, and urges you to select the channel of the bank to be programmed. Press a programmable bank key ([PRIVATE], [FIRE/EMS] or [POLICE]) to be programmed. Note: If you press a nonprogrammable bank key ([WX], [AIR/MRN], or [CB]), " Error" will be displayed, press a programmable bank key and try above steps again. VOLUME Control/ Power Switch This control turns the scanner on or off, and also adjusts the volume. SQ (Squelch) Control Adjust [SQ] to set the scan threshold. When you are monitoring a single channel in Manual Mode, adjust [SQ] to eliminate the background noise heard in the absence of an incoming signal. LCD Display The liquid crystal display (LCD) shows the current channel or its frequency. It also displays the mode indicators, status indicators, and bank indicators. (See "Screens" on page 15 for more information.) 13