Uniden BCD536HP English Owner's Manual - Page 84
Edit Name, Set Frequency, Set Tone, Set Delay Time, Set Alert
View all Uniden BCD536HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Scroll to Tone-Out Setup and press E/yes. Scroll to Tone-Out (0-31) and press E/yes. Note: Close Call DND/Pri and Weather Alert Priority do not operate in this mode. Edit Name Start Delay Time Set Frequency Set Alert Set Tone Set Audio AGC Edit Name See Data Naming. Set Frequency Edit Frequency Enter the frequency and press E/yes. Set Modulation Auto, NFM, FM Set Attenuator On or Off Set Tone Edit Tone A and press E/yes. Enter the tone and press E/yes to save. Edit Tone B and press E/yes. Enter the tone and press E/yes to save. Press Menu to return. For two-tone pages, enter the tones (in Hz) for tone A and tone B. For one-tone pages using short tones between 1.25 and 3.75 seconds, enter tone for tone A, and 0 for tone B. For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 for tone A, and the tone for B. To search for tones, leave the tones for A and B at 0. Set Delay Time 0 - the scanner resumes standby as soon as the carrier drops after a page. 1, 2, 3, 4, 5, 10, 30 - (seconds): the scanner resumes standby mode after the carrier drops and the selected time expires. Infinite - you must press Hold after a page to resume standby mode. Set Alert Set Alert Tone Alert 1-9 or Off. Set Level Level 1-15 or Auto (the master volume level). Set Alert Light Set Color Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White. Set Pattern On, Slow Blink, or Fast Blink. 76