Uniden D1384-2BK English Owner Manual - Page 12

To... skip a message delete this message play old messages stop playback Follow these steps: Select 3:Skip. Select 4:Delete. After the system plays all new messages, select 2:Play. Select 5:Stop. Screening Your Calls While the system takes a message, you can listen from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby. To... hear the caller leaving a message answer the call mute the call screen without answering* Press... Message/mute. Talk/flash. End or return the handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. Programming a Security Code With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you're finished. ## Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number from any touch-tone phone, and wait until the system answers. xx If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don't. You can hang up during the third ring. xx If the system is turned off, it answers after 10 rings and beeps sound. 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 12 - English