Uniden D1384-2BK English Owner Manual - Page 15

Adapter and Battery Information AC adapter Base Charger Part number PS-0035 PS-0035 Input voltage 120V AC, 60 Hz Output voltage 8V AC @ 8V AC @ 300mA 300mA Battery pack (normal use) Part number/ Capacity BT-1021 (300mAh) 2.4V DC Talk time about 7 hours Standby time about 6 days Battery life about 1 year xx Use only the supplied AC adapters. xx Use the proper adapter for the base and any chargers. xx Do not place the unit in direct sunlight or subject it to high temperatures. xx Replace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover). xx When the battery gets low, the handset beeps or shows a low battery alert; put the handset in the cradle for recharging. Rechargeable Battery Warning xx This equipment contains a rechargeable Nickel-Metal-Hydride (Ni-MH) battery. xx Nickel is a chemical known to the state of California to cause cancer. xx Do not short-circuit the battery. xx The batteries in this equipment may explode if disposed of in a fire. xx Do not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode. xx As part of our commitment to protecting our environment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used Ni-MH batteries within the United States. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.) Rechargeable batteries must be recycled or disposed of properly. Warning! The cords on this product and/ or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling. Uniden works to reduce lead content in PVC coated cords in our products and accessories. Compliance Information FCC Part 68 Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company. An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a phone English - 15