Uniden D1384-2BK English Owner Manual - Page 13

3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command; enter a 2-digit command from the chart. 01 Repeat message 05 Stop playback ## If you don't press 02 Play message 06 Turn the system on any keys for 15 seconds, the 03 Skip message 09 Turn the system off system hangs 04 Delete message 10 Hear help prompts up and return to standby. Important Information Troubleshooting General problems Possible solutions xxCheck the telephone cord connection. I can't make or receive xxDisconnect the base AC adapter. Wait a few calls. minutes, then reconnect it. xxMake sure the base is plugged in. The handset won't ring. xxMake sure the ringer is turned on. The handset is not working. xxCharge the battery for 15-20 hours. xxCheck the battery connection. The handset won't xxLet calls ring twice before answering. display CID information. xxMake sure your CID service is active. Audio issues Possible solutions I hear a beeping during a call. xxThe battery is getting low. Check the handset for a low battery alert. Finish your conversation and return the handset to the cradle as soon as possible. There's a lot of noise or static on the line xxCheck for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source. xxMove the handset closer to the base. xxIf you use a telecoil hearing aid, turn the T-coil on (see p. 6). Multi-handset problems Possible solutions I can't transfer calls. xxYou may have to reset the handset. Contact Customer Service for instructions. Two handsets can't talk to a caller. xxSee if any handset is in Privacy Mode. English - 13