Uniden D2997 English Owners Manual - Page 14

To... Press... make an intercom page cancel a page answer an intercom page leave an intercom call Clear/intercom. Select the handset you want to talk with, or All to page all handsets. Flash/exit. Clear/intercom or Talk/end. Flash/exit. Both handsets return to standby. Using Voice Message Notification If you subscribe to a voice mail service, your phone can notify you when you have a new message. This feature supports Frequency-Shift Keying (FSK) notification. Contact your voice mail provider for information. When you have new messages, the display shows a message icon. After you listen to your messages, the message icon turns off. If it doesn't, you can reset it. Press and hold Find until the light turns off (about five seconds). ##Your handsets will beep during this process; just ignore them. Using an Optional Headset You can use a standard 2.5 mm telephone headset with your handsets. To install a headset, remove the headset jack cover and insert the headset plug into the jack. Just make and receive calls as usual, and use your headset to talk to the caller after the call connects. While you connect a headset, the handset automatically mutes the earpiece. Using the Answering System Answering System Options (Ans. Setup) You can change the answering system options from any handset. Just open the menu and select Ans. Setup. Menu Option What it does Security Code Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see p. 17). Ring Time Set the number of rings (2, 4, or 6) before the system answers (see p. 17 about Toll Saver). Record Time Set the amount of time (1 or 4 minutes) callers can leave a message. Choose Announce Only if you don't want the system to let callers leave a message. 14 - English