Uniden D2997 English Owners Manual - Page 17

To... From the base From a handset hear the caller leaving Just listen to the caller over a message the speaker. Press Mute/messages. answer the call Not available Press Talk/end. mute the call screen without answering Press Play/stop. Press Flash/exit or return the handset to the cradle. If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code. Programming a Security Code 1. With the phone in standby, open the menu. Select Ans. Setup, then select Security Code. 2. Use the number keypad to enter a two-digit security code (01 to 99). Press Select/menu when you're finished. ##Remember to make a note of your new security code! Dialing in to Your System 1. Call your telephone number and wait for the system to answer. -- If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don't. You can hang up during the third ring. -- If your answering system is off, it will answer after about 10 rings and sound a series of beeps instead of your greeting. 2. During the greeting (or beeps), press 0 and immediately enter your security code. (If you enter it incorrectly 3 times, the system hangs up and returns to standby.) 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps intermittently to let you know it's waiting for a command. 4. When you hear 01 Repeat message beeping, enter a 2-digit 02 Play message 05 Stop playback 06 Turn the system on command from the chart: 03 Skip message 04 Delete message 09 Turn the system off 10 Hear help prompts ##If you don't press any keys for 15 seconds, the phone will hang up and return to standby. English - 17