Uniden D3288 English Owners Manual - Page 24
Important Information - 2 problems
UPC - 050633273500
View all Uniden D3288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
* If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. Programming a Security Code With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press select when you're finished. Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.) 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command. 4. When you hear beeping, enter a 2-digit command from the chart. If you don't press any keys for 15 01 Repeat message 05 Stop playback seconds, the 02 Play message 06 Turn the system on system hangs up and return to 03 Skip message 09 Turn the system off standby. 04 Delete message 10 Hear help prompts Important Information Solving Problems If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover. General problems No stations can make or receive calls. A handset can't make or receive calls. Possible solutions Check the telephone cord connection. Disconnect the base AC adapter for a few minutes; then reconnect it. Move the handset closer to the base. 24 - English