Uniden D3288 English Owners Manual - Page 4
Connect the Power and Telephone Cords, Test the Connection
UPC - 050633273500
View all Uniden D3288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connect the Power and Telephone Cords 1. Connect the base AC adapter to the AC IN 7.8V jack and the telephone cord to the TEL LINE jack. Route the cords as shown: For desktop use For wall mount use DESK WALL WALL WALL DESK DESK DESK WALL 2. Plug the AC adapter into a standard 120V AC power outlet, and connect the telephone cord to a standard telephone wall jack. 3. If you are mounting the phone on the wall, place the mounting slots over the pins on the wall plate; slide the base down to lock it into place. Test the Connection Pick up the corded handset from the base. You should hear a dial tone and the display on the base should say Talk. When you get a dial tone, make a quick test call. If... Try... the display says Check TEL Line or you don't hear a dial tone checking the connection between the base and the phone jack. you keep hearing a dial tone changing to pulse dialing. Changing to Pulse Dialing Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone's dial mode. 1. Press Menu and choose Global Setup. 2. Select Dial Mode then Pulse. You'll hear a confirmation tone. To send DTMF tones during a call (e.g., for an automated response system), press * to temporarily switch to tone dialing. When you hang up, the phone automatically returns to pulse dialing. - English