Uniden D3288 English Owners Manual - Page 27
Resetting Stations, Registering Handsets
UPC - 050633273500
View all Uniden D3288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Liquid Damage CAUTION: If the base is covered in liquid, disconnect the adapter & phone cord from the wall before touching it. If the liquid is only on the exterior housing of the base or handset, wipe it off and use as normal. If you can hear liquid inside the housing: 1. Remove all compartment covers, and disconnect all cables and cords. 2. If liquid is leaking from any vent or hole, turn the phone so that vent faces down. If not, place the largest vent face down. 3. Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers & reconnecting cords. Resetting Stations If you have problems with the base, unplug the base to reset it. Plug it back in after at lease a minute. If you have problems with a cordless handset or want to replace one, reset it: 1. Press & hold END and # at the same time until you see the System Reset menu. 2. If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don't have that base anymore, select Base Unavailable. 3. To confirm, select Yes. The handset displays Handset not registered. Registering Handsets If you see a "not registered" message on a handset, you must register it to a base before using it. 1. On the base, open the menu and select Register Accy. 2. On the handset, press and hold #; the handset displays Registering. 3. Wait until the display says Registration Complete (about 30 seconds), then pick up the handset; press home/flash. If you don't hear a dial tone or the display says Registration Failed, charge the battery completely, then try again. Adapter and Battery Information AC adapter Base Charger Part number PS-0034 PS-0035 Input voltage 120V AC, 60 Hz Output voltage 7.8V AC @ 450mA 8V AC @ 300mA Use only the supplied AC adapters. Use the proper adapter for the base & any chargers. Do not place the unit in direct sunlight or subject it to high temperatures. Battery pack (with normal use) Part number BT-1022 Capacity Talk time 300mAh, 2.4V DC about 7 hours Standby time Battery life about 7 days about 1 year Replace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover). English - 27