Uniden DCT6465 English Owners Manual - Page 21

GETTING STARTED Global Setup If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time. Submenu option Description Day & time CIDCW (Default is CW on/CWDX off) Area Code Dial Mode (Default is tone) Copy Phonebook Voice Mail Tone (Default is on) Set the day and time of your display (see page 24). Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as regular Caller ID on a call waiting number (see page 24). Call Waiting Deluxe allows you to handle call waiting calls in seven different ways (see page 49). Store or edit the area code. If you enter a 3-digit area code number in the"Area Code" option, your local area code does not appear in the Caller ID message. For calls received from outside your local area code, you will see a full 10-digit number (see page 24). Note: If your calling area requires 10-digit dialing, do not program this option. Set the dial mode to tone or pulse (see page 25). Most phone systems use tone dialing, which send DTMF tone through phone line. The default is tone dialing. Depends on your dialing system, set the dial mode. Allow you to transfer the phonebook data stored in one handset to another handset (see page 25). If your service does not support SDT message signal, set your VMWI (Visual Message Waiting Inculcator) not to detect SDT message signal (see page 26). System Reset System Reset is used to clear the handset's ID from the main base unit, or the base ID from the handset. Submenu option Description Deregister HS Replacing Base Clear the handset ID from the base. Use this option, for example, when you change the digital security code (see page 26). Clear the base ID. Use this option, for example, if you wish to deregister the base to use the handset with another base of the DCT series (DCT646/DCT6465/DCT648/ DCT6485 series) (see page 26). www.uniden.com GETTING STARTED [19]