Uniden DCT6465 English Owners Manual - Page 29

Making and Receiving Calls This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other tasks, such as cooking. 㨮 appears during hands-free conversations. You can easily switch a call from normal conversation to hands-free conversation. To switch a call, press speaker during the call. From the Handset Normal conversation Hands-free conversation From the Base Handset On the Cradle Pick up the handset (AutoTalk) or pick up the handset and press To answer a call talk/flash. Handset Off the Cradle Handset Off the Cradle * Press any number key, /tone/ Press speaker. ←, or #/→ (Any Key Answer), or press talk/flash. Press (speaker). To make a call Handset Off the Cradle 1) Press talk/flash. 2) Listen for the dial tone. 3) Dial the number. OR Dial the number, and then press talk/flash. Handset Off the Cradle 1) Press speaker. 2) Listen for the dial tone. 1) Press (speaker). 3) Dial the number. 2) Listen for the dial tone. OR 3) Dial the number. Dial the number and then press speaker. To hang up Press end or return the handset to the cradle (AutoStandby). Press (speaker). To enter a pause within the dialing sequence When you dial the number in standby mode, press redial/ pause. P appears in the display, which represents a pause. Press (speaker). When you dial the number press pause. www.uniden.com note •To set Autotalk, see page 22 or to set Anykey Answer see page 23. •The handset microphone is located at the bottom of the handset (see "Controls and Functions" on page 8). Position yourself as near to the handset as possible and speak clearly. •If the line is in use by another handset(s), Line In Use appears in the display of all registered handset's display, that are not in use. BASICS [27] BASICS