Uniden DCT6465 English Owners Manual - Page 32

Earpiece and speaker volume Pressing the volume up key or volume down key (labeled as /vol/∧ or /vol/∨ key) during a call will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended. When you press volume up key (ring/vol/∧) in the maximum volume level or volume down key (ring/vol/∨) in the lowest volume level, an error tone sounds. BASICS Ringer Mute You can temporarily mute the incoming ring. When the handset is off the cradle and the phone is ringing, press end. The incoming ring will return to the previous setting starting with the next incoming call. note Adjusting the Base Ringer Volume and Speaker Volume •If you select Off, the ringer off LED on the base will be illuminate. •Standby Mode - The handset is not in use and talk/flash has not been pressed. Base ringer volume In standby mode, press ring/volume/∧ or ring/volume/∨ on the base to select one of four base ringer volume settings (High, Medium, Low, and Off). Each time ring/volume/∧ or ring/volume/∨ is pressed, the volume setting is changed. You will hear the current ringer volume revel. You have four ringer volume options. One allows you to turn the base ringer off. The other three are volume levels. You can also adjust the volume when the phone is ringing by pressing ring/volume/∧ or ring/volume/∨. Speaker volume When the base speaker is in use, press ring/volume/∧ or ring/volume/∨ on the base to adjust the volume. Press ring/volume/∧ for louder or ring/volume/∨ for softer. Press and hold ring/ volume/∧ or ring/volume/∨ on the base to scroll quickly through the volume levels. [30] BASICS www.uniden.com