Uniden EXA8955 English Owners Manual - Page 29
Selecting the message record time, Selecting a PIN code
View all Uniden EXA8955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Press or multiple times to scroll through numbers on the display. Selecting the message record time You can set your answering system to record messages up to one or four minutes long. One minute option: move the REC TIME switch to 1. Four minutes option: move the REC TIME switch to 4. REC TIME ANN/4/1 ª Announce only feature: The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays " " when system is on standby. Prerecorded outgoing message for Announce only feature is: "Hello, no one is available to take your call." Selecting a PIN code To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps. 1 On the base, press and hold pin button until a beep sounds and the LED displays 00. 2 To set the first number, press or to scroll from 00 to 90. When the desired number appears in the display, press pin . This selects the first number. 3 To set the second number, press or to scroll from 0 to 9. When the desired number appears in the display, press pin . This selects the second number and then the entered number is announced. 26