Uniden EXA8955 English Owners Manual - Page 35

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby. The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds Remote access away from home You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new outgoing message, and to monitor sounds in the room. 1 Call your telephone number. 2 During the answering machine is activated, press # and your PIN code. 3 The answering system announces the time and day stamp and the number of messages stored in memory. Then the message playback automatically begins. 4 You may continue to listen to your massage, or you may select a command from the following chart. Command # then 1 # then 2 # then 3 # then 4 # then 5 # then 6 # then 7 # then 8 # then 9 * # then Function Repeat Playing your messages Skipping a message Deleting a message Stop message playback Answering system on Voice memo record/stop Outgoing message record/stop Answer system off Room monitor 5 After all of your messages have played, or the playback time exceeds 4 minutes, you will hear that the intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above. 6 When you are finished, hang up to exit the system. The answering system automatically returns to standby. 32