Uniden MC535 English Owners Manual - Page 9

Color profile: Disabled Composite Default screen Engine Noise Suppression The MC535 has been designed to minimize ignition and alternator noise. However, in some installations it may be necessary to take additional steps to help eliminate noise interference. During installation, try to direct the DC battery wires, the antenna lead, and accessory cables away from the engine compartment or ignition and alternator wiring. If the noise continues, it may be necessary to install a noise suppression kit. Contact your Uniden dealer for more information. Installing the MC535 After choosing a location, position the radio (with the bracket, microphone, power cord, antenna cable, and external speaker lead, if installed) to make sure it fits. Then follow these steps: 1. Using the bracket as a template, mark the holes for the mounting hardware. 2. Drill the holes and mount the bracket with hardware appropriate for the mounting surface. 3. Connect the red power lead to the positive (+) battery terminal or to an accessory contact in your vessel's fuse box. Note:The power cord is equipped with a 6-ampere fast blow fuse to protect your radio. Use only a 6-ampere replacement fuse. 4. Connect the black wire of the power cord to the negative (-) battery terminal or to a ground source in your vessel's fuse box. 5. Install the radio in the mounting bracket and connect the antenna cable and accessories to their appropriate jacks and connectors. 5 C:\MANUALS7\mc535\Mc535.vp Tue Sep 08 10:53:47 1998