Uniden OCEANUSDSC-BK English Owners Manual - Page 25
Select
UPC - 050633500538
View all Uniden OCEANUSDSC-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Select the individual you want to contact using CH L and M. Press SELECT to transmit the individual DSC signal. 4. WAITING appears followed by the individual you have selected, and the radio use 70 CH while transmitting. 5. When you receive the individual acknowledgment successfully, WAITING will change to COMPLETED . Both radios tune to the selected channel. You are now ready to transmit on that channel. Note: If there is not any data registered in the directory you cannot proceed to the 2nd step. See the SETUP section for directory, setup instructions. Select an open (unused) working channel first, then make the call. After the acknowledgment, both radios tune to the previously selected channel. 1-B. GROUP 1. Press SELECT at DSC CALL (To enter DSC CALL, see page 21). INDIVIDUAL appears. 2. Press CH M once to select GROUP. 22