Uniden QT206 English Owners Manual - Page 17
Setting The Shallow Water Alarm
View all Uniden QT206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SETTING THE SHALLOW WATER ALARM Located just below the LCD window are two keys labeled "DOWN" and "UP" Alarms. These keys are used to set the Shallow Water depth alarm so that it will audibly alert you if you enter water shallower than your preset depth alarm. To set the alarm, press the "DOWN" key. The LCD shows an alarm depth of A03. Pressing the "DOWN" continuously cycles the alarm setting deeper by one foot increments from A03 through A10 (for example: 3, 4, 5, 6, 7, 8, 9, 10). After A10, the alarm settings are by 2-foot increments (for example: 10, 12, 14, 16, 18, 20 feet). The alarm settings jump by 5-foot increments (for example: A20, A25, A30). When you see a digital readout proceeded by an "A", this is your ALARM setting. This number appears in the display window immediately after you press either alarm key and then will disappear after several seconds. This number remains in the unit's memory until power is turned off. To decrease the alarm setting, press the "UP" key. The display will show these numbers in decreasing value so that the alarm is shallower. Several seconds after you press either the "UP" or "DOWN" keys, the instrument displays the actual depth reading. A00 indicates the alarm is off. 15