Uniden QT206 English Owners Manual - Page 8
The Transducer And The Bracket. This Damage Is - transducers
View all Uniden QT206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
transducer directly behind any strakes, ribs, intakes and outlets for live wells and/or engine cooling water, or any protrusion which may cause turbulence or cavitation. On slower, heavier displacement boats, good results can be achieved further from the keel. FIBERGLASS V-HULL BOATS-TWIN ENGINE (MODERATE TO DEEP-VEE DEADRISE ANGLE) FIBERGLASS V-HULL MODERATE TO LARGE DEADRISE HULL TRANSDUCER IS BELOW STRAIGHT LINE EXTENSION OF HULL. DO NOT INSTALL YOUR TRANSDUCER UNDERNEATH A GASOLINE OVERFLOW. THIS WILL DESTROY THE PLASTIC MATERIAL OF THE TRANSDUCER AND THE BRACKET. THIS DAMAGE IS NOT COVERED UNDER WARRANTY. Also, do not use LOCKTITE® or any other solvents on the mounting hardware or transducer. These materials may destroy the transducer. Mounting The Transducer The transducer and bracket assembly should be oriented vertically with respect to the water to yield a vertically-directed acoustic beam. 1. Attach the transducer to the bracket as shown below. 2. Place transducer and bracket at the selected location on the boat transom. Align the bracket so that the bottom surface of the transducer is even with the underside of the boat. FIBERGLASS V-HULL BOATS-TWIN ENGINE (MODERATE TO DEEP-VEE DEADRISE ANGLE) HULL WEDGE POINTING FORWARD INSTALL BETWEEN DRIVES-MODERATE TO DEEP-VEE DEADRISE ANGLE (Install between drives) DEADRISE ANGLE 6