Uniden QT206 English Owners Manual - Page 5
Installing The Qt-206 - installation
View all Uniden QT206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLING THE QT-206 1. Find a location on your dash panel which will provide clear viewing and access to the LCD window. 2. After finding the right location for the indicator unit, mark a 2-inch hole to be cut out. 3. Check behind the panel for any cables or wiring which could be damaged. Then cut out the 2-inch hole. 4. Test fit the unit in the hole, and make any adjustments with your saw or drill. 5. Extending out of the back of the instrument is a brass shaft. Attach the U-shaped mounting bracket over this shaft, and place the washer on the shaft. Thread the nut onto the shaft until the U-shaped bracket is firmly against the back of the dash panel. 6. Look at the front of the instrument to ensure that it is aligned properly. Then tighten securely. 1/2" BRASS STUD P/N: 210-005 2 3/8" 2" 2 1/2" NUT P/N: 3203-009 MOUNTING BRACKET WASHER P/N: 950-025 P/N: 308-029 X-ducer Red Black Shield Alarm More Less Shallow Sensitivity Power + 3