Uniden SOLARA English Owners Manual - Page 14

Transmitting - marine radio

Page 14 highlights

Transmitting The SOLARA transmits on 54 marine frequencies and receives 80 different marine frequencies. Certain channels - the weather channels, channel 70 of both the USA and International frequencies, and channel 15, 81 and 83 of the USA frequencies - are receive only. Your radio will not transmit on these channels. For your reference, a listing of all the available marine channels is printed on the back cover foldout. Setting TX Output Caution: It is important to remember to always use the LO position in port or for short range communications. 1. When you turn the SOLARA on, the unit is automatically set to transmit at 25 watts. 2. Press HI/LO, to change the transmitter output to 1W. 3. Press HI/LO again, to change back to the higher power setting. Note: Each time the HI/LO key is pressed a short tone sounds. Emergency High Power Override The FCC has limited transmission power to 1W on channels 13 and 67, except in emergencies. These channels are set automatically to LO when selected. For example, you are on Channel 13. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

10
Transmitting
The
SOLARA
transmits on 54 marine frequencies and receives 80
different marine frequencies. Certain channels — the weather channels,
channel 70 of both the USA and International frequencies, and channel
15, 81 and 83 of the USA frequencies — are receive only. Your radio will
not transmit on these channels. For your reference, a listing of all the
available marine channels is printed on the back cover foldout.
Setting TX Output
Caution:
It is important to remember to always use the
LO
position in
port or for short range communications.
1.
When you turn the
SOLARA
on, the
unit is automatically set to transmit
at 25 watts.
2.
Press
HI/LO
, to change the transmitter
output to 1W.
3.
Press
HI/LO
again, to change back to
the higher power setting.
Note:
Each time the
HI/LO
key is pressed a short tone sounds.
Emergency High Power Override
The FCC has limited transmission power to 1W on channels 13 and 67,
except in emergencies. These channels are set automatically to
LO
when selected.
For example, you are on Channel 13.