Uniden SOLARA English Owners Manual - Page 19

Specification General Channels Controls Status Indicators Channel Display Channel Selector Buttons Connectors Size Weight Supply Voltage Antenna Impedance Microphone Speaker Operating Temperature Range Shock and Vibration FCC Approvals Transmitter Power Output Power Requirement Modulation Signal-to-Noise Audio Distortion Spurious Suppression Output Power Stabilization Frequency Range Frequency Stability: Receiver Frequency Range Sensitivity Circuit Squelch Sensitivity Spurious Response Adjacent Channel Selectivity Audio Output Power Power Requirement IF Frequencies Transmit 54 Receive 80 Marine 10 Weather ON/OFF/Volume, Squelch 16, INT, LO, TX LED (transmit) LED (Dual 7 segment) UP/DWN select keys CH16, INT, HI/LO Antenna and remote speaker 82mmH x 189mmW x 207mmL 1.2 kg (with Microphone) 13.8V DC negative ground 50Ω, nominal Condenser Microphone with curl cord (Impedance 2kΩ) 1.82 inch, 8Ω -20°C to +50°C (-4°F to +122°F) Meets or exceeds EIA standards, RS152B and RS204C Type accepted under part 80 of the Rules; meets Great Lakes Agreement and party boat requirements 1 watt or 25 watt (switch selectable) 1 watt output: 1.0A at 13.8V DC 25 watts output: 4.5A at 13.8V DC FM ±5 kHz deviation (FCC designator F3E) 45 dB at 3 kHz Less than 5% with 3 kHz deviation with 1000 Hz modulating frequency -60 dB at 1 watt, -65 dB at 25 watts Built-in automatic level control (ALC) 156 to 158 MHz ±300 Hz nominal 156 to 163 MHz 0.25µV for 12 dB SINAD 0.35µV for 20 dB S/N Dual Conversion Super Heterodyne PLL 0.2µv Threshold 60 dB 70 dB at ±25 kHz 4.0 watts (10% Distortion) into a 4 Ω load 0.3A at 13.8V DC squelched 0.8A at 13.8V DC at maximum audio output 1st - 16.9 MHz 2nd - 455 kHz 15