Uniden UDW10003 English Owners Manual - Page 17

Solving Problems If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If... Try.. The image on the display is - Adjusting the brightness on the receiver (in the System Setup sub- too bright. menu). The image on the display is too dim. - Adjusting the brightness on the receiver (in the System Setup submenu). - Making sure the camera is at the right distance for low-light conditions. The image on my television - Adjusting the brightness on your television. (The receiver brightness is too bright/dark. setting does not affect the television.) The image does not fit my - Changing the TV out setting on the receiver (in the System Setup TV screen. sub-menu). The display is completely blank. - Making sure the AV output cable is not connected. - Making sure the receiver is plugged in. - Switching to a different camera. (If the receiver is in quad display mode and the cameras are not working, the screen could be blank.) - Resetting the receiver. The display just says No Signal. - Switching to a different channel. - Checking the channel status icon at the top of the screen to see which channel the receiver is on. Make sure the camera assigned to this channel is powered on. - Re-pair the camera to the receiver. The display just says USB PC Camera Mode. - Disconnecting the USB cable. The image on the screen is - Resetting the camera. frozen. - Resetting the receiver. 17