Uniden UDW10003 English Owners Manual - Page 5
Check the Video Signal, Signal, status, Channel, Charge - battery
UPC - 050633405000
View all Uniden UDW10003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Check the Video Signal As soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen tell you what's going on with the camera and receiver. Signal status The table below shows the different status icons and what they mean. Since the icons appear based on the state of the camera and receiver, you won't see all of these icons at the same time. Channel status 1 Charge status Icon What it means The signal from the camera is 1-low, 2-fair, 3-good, or 4-perfect. There is no signal from the camera. 1 2 3 4 The video currently on the display comes from the camera connected to channel 1, 2, 3, or 4. The battery is charging. This icon disappears when the battery is full. The video is currently zoomed in. If... the signal status icon shows no bars or the display says No Signal the signal status icon shows one or two bars or the video quality is poor there is a lot of static on the receiver Try... - making sure the camera is turned on - re-pairing the camera and receiver (see page 13) see page 18 for tips on improving video quality see page 19 for tips on avoiding interference