Uniden UDW10003 English Owners Manual - Page 4
Getting Started, Connect the Power, Charge the batteries - camera
UPC - 050633405000
View all Uniden UDW10003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Getting Started Connect the Power 1. Connect one AC adapter to the camera's power input and the other to the receiver's power input. (The two adapters are exactly the same.) POWER button POWER button LINK 2. Connect the other end of each adapter to a standard 120 volt AC indoor outlet. 3. Press the Power button on both the receiver and the camera; the bottom light on the left (the Power status light) should turn on. If... a Power status light doesn't come on Try... - reconnecting the AC adapter - seeing if the power outlet is controlled by a wall switch Charge the batteries The batteries in your camera and receiver will charge whenever the power is connected. Let the batteries charge completely (about 8 hours) before you unplug the camera and receiver to move them around. (You can still use the camera and receiver: just keep them plugged in.)