Uniden UDW155 English Owner's Manual - Page 15

Changing to a Different Camera ►► On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes back to the first camera. 1 2 3 4 ►► Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal. 1 2 3 4 NO SIGNAL ►► You should only turn a channel On if you have a camera paired to that channel. ►► The receiver skips any channels that are set to Off in the menu. 1 2 3 4 (Channel CAM2 set to Off.) 15