Uniden UDW20553 English Owners Manual - Page 15

Using the Menu To open the menu, press OK Use UP and DOWN to move the cursor Audio Vol Scan Time CAM1 CAM2 CAM3 CAM4 Pair CAM System Factory The selected item is Use LEFT highlighted and RIGHT 10 OFF ON 9 to scroll through the 11 options for the item ON ON ON 1 2 3 4 Brightness 10 TV out NTSC Power Save OFF Setup Reset To open the System Setup sub-menu, press OK To close the menu, press OK Item Audio Vol Use it to Adjust the volume of the audio from the camera. Choose a value from 0 (off) through 20 (maximum). Scan Time Set the length of time the receiver spends on each active camera during a scan (see page 20) or activate quad display (see page 21). CAM1 - CAM4 Turn each of the four camera channels On (enabled) or Off (disabled). Pair CAM Pair a camera to the selected channel (see page 18). System Setup Sub Menu Brightness Adjust the brightness of the display. Choose a value from 1 (min) through 15 (max). TV out Change the video output format from NTSC (North America) to PAL (Europe). Power Save Turn on power save mode. If you set this field to Auto, the display turns off if it's idle for more than one minute. (The audio will remain active.) To turn the display back on, press OK. Factory Reset Reset the receiver to factory defaults. Any changes or settings will be lost. 15