Uniden UDW20553 English Owners Manual - Page 16

Using Zoom Mode, Understanding, Night Vision - monitor

Page 16 highlights

Using Zoom Mode Normal view The receiver can zoom in so you can see the video better. 1 In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display. Pan and tilt in zoom mode Once in zoom mode, you can pan and tilt the camera to see the outside edges of the zoomed in area. Use the arrow buttons to pan right and left or tilt up and down. Pan and tilt features are only available in zoom mode. Zoomed-in view 1 Tilt up Pan left Pan right Understanding Night Vision The weatherproof camera(s) included with your receiver has 24 infrared LEDs for low-light conditions. Tilt down ►► The infrared LED automatically turns on when the ambient light gets too dim (around twilight); the LED provides enough light for the camera to capture clear images in deep twilight or under a very bright full moon. (See page 26 for lux specifications.) ►► For the best night vision results, place the camera no closer than about 10 feet (3 meters) and no further than about 30 feet (9 meters) from the point you want to monitor. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

16
Using Zoom Mode
The receiver can zoom in so
you can see the video better.
In zoom mode, the receiver
increases the pixel size and
focuses on the center of the
picture. You will also see the
ZOOM
icon in the upper right
corner of the display.
Pan and tilt in zoom mode
Once in zoom mode, you can pan
and tilt the camera to see the
outside edges of the zoomed in
area. Use the arrow buttons to
pan right and left or tilt up and
down.
Pan and tilt features are only
available in zoom mode.
Understanding
Night Vision
The weatherproof camera(s)
included with your receiver has
24 infrared LEDs for low‑light
conditions.
The infrared LED automatically turns on when the ambient light gets too dim (around twilight);
the LED provides enough light for the camera to capture clear images in deep twilight or under a
very bright full moon. (See page 26 for lux specifications.)
For the best night vision results, place the camera no closer than about 10 feet (3 meters) and no
further than about 30 feet (9 meters) from the point you want to monitor.
1
1
Normal view
Zoomed-in view
Tilt up
Tilt down
Pan left
Pan right