Uniden UDW20553 English Owners Manual - Page 6

Connect the indoor camera 1. Connect one end of the small barrel AC adapter to the camera's Battery status power connector and the other end to a standard 120 volt AC Link status outlet. Power status 2. Press the Power button on the camera; the Power status light should turn on. If it doesn't, try reconnecting the AC adapter, and make sure the power outlet isn't controlled by a wall switch. If... a Power status light doesn't come on Try... --reconnecting the AC adapter --seeing if the power outlet is controlled by a wall switch Antenna Lens POWER LINK Power LINK connector Stand Check the Video Signal Signal status As soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen tell you what's going on with the camera and receiver. The table below shows the different status icons and what they mean. Since the icons appear based on the state of the camera and receiver, you won't see all of these icons at the same time. Channel status 1 6