Vaddio RoboSHOT 12 USB User Guide

Vaddio RoboSHOT 12 USB Manual

Get Vaddio RoboSHOT 12 USB PDF manuals and user guides View all Vaddio RoboSHOT 12 USB manuals
Add to My Manuals
Save this manual to your list of manuals

Vaddio RoboSHOT 12 USB manual content summary:

  • Vaddio RoboSHOT 12 USB | User Guide - Page 1
    Installation and User Guide VADDIO™ ROBOSHOT™ 12 USB CAMERA Enterprise-Class, High Definition PTZ Conferencing Camera with simultaneous USB 3.0, IP (H.264) Streaming and HDMI Outputs, Tri-Synchronous™ Motion and Wide Angle 12X Optical Zoom Lens RoboSHOT 12 USB Part Numbers: 999-9920-000 (North
  • Vaddio RoboSHOT 12 USB | User Guide - Page 2
    RoboSHOT 12 USB Inside Front Cover, Mostly Blank RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 2 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 3
    Software and OS Compatibility ...11 USB 3.0 UVC Drivers ...12 Table: Supported USB 3.0 UVC Resolutions Uncompressed 12 Table: Supported USB 2.0 UVC Resolutions Uncompressed 12 Table: Supported Resolutions in Firmware Release 1.0.1 RoboSHOT 12 USB 12 The RoboSHOT 12 USB Screen Shot Tour ...13 DHCP
  • Vaddio RoboSHOT 12 USB | User Guide - Page 4
    RoboSHOT 12 USB conferencing camera is unparalleled in today's PTZ camera market. All this and it's made in the USA, at the Vaddio HQ in Minnetonka, Minnesota. Example: Built-in Camera Control Web Page Intended Use: Before operating the device, please read the entire manual thoroughly. The system
  • Vaddio RoboSHOT 12 USB | User Guide - Page 5
    ™ Control Adapter One (1) 6' (1.83m) USB 3.0 Cable One (1) Quick Start Guide Note: Full Manuals are downloaded from vaddio.com RoboSHOT 12 USB System Part Number: 999-9920-001 One (1) RoboSHOT 12 USB HD PTZ Camera One (1) Vaddio IR Remote Commander One (1) 12 VDC, 3.0 Amp Switching Power Supply One
  • Vaddio RoboSHOT 12 USB | User Guide - Page 6
    sized conference room. 2) Camera Support Arm: The RoboSHOT cameras use a single control firmware update. 5) Logo: Really Cool Logo Badge (RCLB) is located on the IR Window. 6) Camera Base: Cast zinc alloy base for strength and stability, powder coated for toughness with fine texture. RoboSHOT 12 USB
  • Vaddio RoboSHOT 12 USB | User Guide - Page 7
    RoboSHOT 12 USB Image: RoboSHOT 12 USB Rear Panel Connections. ① ④ ⑤ ② ⑥ ⑦ ③ 1) Power Connector: 12 VDC, 3.0 Amp power input on an EIAJ-04 connector with a positive center. 2) Network PoE+ RJ-45: The PoE+ Gb Ethernet port allows the camera to be powered from a PoE+ network switch or power
  • Vaddio RoboSHOT 12 USB | User Guide - Page 8
    , Monitors and Speakers make up this UCC Application. Near-end and Far-end video is simulated. Good Speakers EasyMics (w/AEC) RoboSHOT 12 USB HD PTZ Camera in Minneapolis, MN Easy USB Mixer/Amp Near End Self-view Monitor HDMI Video Ethernet, Control, IP Streaming, Remote Management and PoE
  • Vaddio RoboSHOT 12 USB | User Guide - Page 9
    RoboSHOT 12 USB Dip Switch Settings Further Explained:  IR 1, 2 and 3 (SW 1 &2): A single IR remote has the capability of operating up to three different PTZ cameras camera system, pull and route the required cables from the camera the video is present and troubleshooting USB or IP streaming issues.
  • Vaddio RoboSHOT 12 USB | User Guide - Page 10
    a default medium speed will be used.  Preset Store: IR Remote is limited to positional (PTZ) type presets. To set a preset, position the camera, hold down the Preset Button and touch the one of the preset numbered buttons 1 through 6. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 10 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 11
    supported and there are many Vaddio specific commands in the following Command and Inquiry Lists Built-in Webserver Control The RoboSHOT camera RoboSHOT 12 USB camera. SOFTWARE AND OS COMPATIBILITY The RoboSHOT 12USB will work with the following web browsers, soft codecs, computer operating systems
  • Vaddio RoboSHOT 12 USB | User Guide - Page 12
    x 240 3015 4:3 180p (320x180) 30/15 16:9 *15 FPS - Microsoft Lync Video Capture Rev. G Compliant Table: Supported IP Streaming Resolutions in Firmware Release 1.0.1 RoboSHOT 12 USB Format Compression Resolutions Frame Rates Aspect Ratio RTSP H.264 Video 1080p 30/25/15 16:9 720p 60
  • Vaddio RoboSHOT 12 USB | User Guide - Page 13
    ROBOSHOT 12 USB SCREEN SHOT TOUR The RoboSHOT12 USB camera platform uses a Linux OS and has a built-in web server. The internal web pages will allow control of the attached camera via an Ethernet network connection. These web pages will allow the user or administrator to control the camera, set PTZ
  • Vaddio RoboSHOT 12 USB | User Guide - Page 14
    RoboSHOT 12 USB Screen Shot: Camera Control Page This web page provides access to the camera controls for the User and the Admin. ➊➋ ➍ ➌ ➎ ➐ ➏ ➑ 1) Pan, Tilt and Home Controls: These intuitive controls use the up/down and diagonal arrows for camera the technical folks at Vaddio (really Scott set
  • Vaddio RoboSHOT 12 USB | User Guide - Page 15
    RoboSHOT 12 USB Screen Shot: Storing Presets ➊ ➋ ➌ ➍ 1) Store Preset: When the Store Preset button is clicked (point 7 on previous page), the Store Preset dialog pops into existence. To save the current camera shot, click one of the Preset buttons (1 through 12), the button will be highlighted
  • Vaddio RoboSHOT 12 USB | User Guide - Page 16
    allow automatic guest access to the main camera control page. If guest access is turned on by the Admin, then system will open to the camera control page and an additional Admin Login is provided. The default Admin password is: password. Admin RoboSHOT 12 USB - Document Number 342-0981 Rev B Page
  • Vaddio RoboSHOT 12 USB | User Guide - Page 17
    RoboSHOT 12 USB Screen Shot: Admin Menu - Camera Settings Once the Admin logs in, then all the admin menu buttons appear on the left side of the screen. The first menu after camera controls is Camera Settings. ➊ ➋ ➌ ➍ ➎ ➏ ➐ 1) Load Preset at Startup: Check this box to move the camera to a
  • Vaddio RoboSHOT 12 USB | User Guide - Page 18
    RoboSHOT 12 USB  Auto White Balance check box: When checked, camera will operate in Auto White Balance mode, when unchecked camera will be in Manual White Balance Mode and allow for adjustment of Red and Blue Gain.  Red Gain: Move the adjustment slider as required for amount of Red Gain
  • Vaddio RoboSHOT 12 USB | User Guide - Page 19
    RoboSHOT 12 USB Screen Shot: Admin Menu - USB 3.0 and IP Streaming Video Page ➊ ➋ ➌ ➍ ➎ NEW FEATURE ➏ 1) USB Streaming Mode: Streaming can be set for either USB 3.0 streaming (uncompressed) and IP streaming (RTSP format with H.264compression. The RoboSHOT can simultaneously stream USB and IP video
  • Vaddio RoboSHOT 12 USB | User Guide - Page 20
    RoboSHOT 12 USB Screen Shot: Admin Menu - DHCP Network Configuration Under the Networking menu, The If Static IP is used, the IP Address, Subnet Mask and Gateway are manually entered. Click on Save to keep the Static IP information. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 20 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 21
    Diagnostics menu button will display a set of self-diagnostics. These diagnostics may help the Vaddio technical support team diagnose a problem with the RoboSHOT camera. The controls include Download, Refresh, Clear and Restore. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 21 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 22
    RoboSHOT 12 USB Screen Shot: Admin Menu - System The System Menu is where the System Info is displayed and Firmware Updates are performed. There will be firmware updates and upgrades over the life of the camera. The file for the firmware update is chosen in this menu and the update is started here
  • Vaddio RoboSHOT 12 USB | User Guide - Page 23
    RoboSHOT 12 USB Screen Shot: Admin Menu - Update Confirmation After choosing an update file and clicking on "Begin Firmware Update..." a confirmation pop-up and warning will be displayed. Please contact Vaddio Tech support for assistance with updates. Please read and completely understand the pop-up
  • Vaddio RoboSHOT 12 USB | User Guide - Page 24
    RoboSHOT 12 USB Screen Shot - Admin Menu - Help Service/Help information can be found under the Help menu. Support phone numbers and e-mail, manuals, FAQ's and System information is listed on [email protected]. TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling
  • Vaddio RoboSHOT 12 USB | User Guide - Page 25
    Numbers RoboSHOT 12 USB Camera, 999-9920-000 (North America), 999-9920-001 (Int'l) Image Device 1/2.8-Type Exmor CMOS Sensor HDMI Video Resolution/Freq 1080p60/59.94/50/30/25, 1080i/60/59.94i/50, 720p/60/59.94/50/30/25 Vaddio Special Features  Tri-Synchronous Motion: Concurrent PTZ motor
  • Vaddio RoboSHOT 12 USB | User Guide - Page 26
    control of red gain pq=Red gain (00h - FFh) Manual control of blue gain pq=Blue gain (00h - FFh) Auto Exposure mode Manual Control mode Shutter Priority Auto Exposure mode Iris Priority Auto Exposure Mode Bright Mode (modified AE mode) RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 26 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 27
    RoboSHOT 12 USB RoboSHOT Command List (2/3) Command Set Command CAM_Shutter Reset Up Down Direct CAM_Iris Reset Up Down Direct CAM_Gain Mode On/Off pqrs=Camer ID (0h-ffffh) p= preset number(0h-0fh) qr= Speed(01h-18h) RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 27 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 28
    RoboSHOT 12 USB RoboSHOT Command List (3/3) Command Set Command Cam_Display On On(alternate) Off Off(alternate) On/Off On/Off Zoom position (0000h-7AC0h) pp:pan speed (01h-18h), qq:tilt speed (01h-14h), rr:zoom speed (0h-07h) RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 28 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 29
    y0 50 0p FF Comments On Off (Standby) pqrs: Zoom Position Auto Focus Manual Focus pqrs: Focus Position pqrs: Focus Near Limit Position AF Sensitivity Normal AF Sensitivity Gain On Off Noise Reduction p: 00h to 05h Gamma p: 00h , 01h RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 29 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 30
    00h to 07h (Address) pqrs: 0000h to FFFFh (Data) On Off On Off pqrs: Camera ID mnpq: Model Code RoboSHOT-12 RoboSHOT-30 mm: Register No. (=00h to 7Fh) pp: Register Value (=00h to FFh) mm 00h to 10h) wwww= Pan position zzzz=Tilt Position RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 30 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 31
    28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 Steps 28 26 24 22 20 18 16 14 12 10 8 6 Iris +7 +6 +5 +4 +3 +2 +1 0 -1 -2 -3 -4 -5 -6 -7 Gain +10.5 dB +9 dB +7.5 dB +6 dB +4.5 dB +3 dB +1.5 dB 0 dB -1.5 dB -3 dB -4.5 dB -6 dB -7.5 dB -9 dB -10.5 dB RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 31
  • Vaddio RoboSHOT 12 USB | User Guide - Page 32
    12 USB ROBOSHOT TELNET SERIAL COMMAND API The Vaddio Serial Command protocol is a high level text based command line interface supported via telnet session on the RoboSHOT. The command application protocol interface is intended to allow external device such as AMX or Crestron to control the camera
  • Vaddio RoboSHOT 12 USB | User Guide - Page 33
    2 tri-sync 10 save-ccu Store current camera position and CCU settings as preset 2, will recall using tri-sync at speed 10 camera preset store 4 tri-sync 15 Store current camera position as preset 4, will recall using tri-sync at speed 15 RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 33
  • Vaddio RoboSHOT 12 USB | User Guide - Page 34
    Recalls a ccu scene store Stores a custom ccu scene custom A custom scene (can be stored or recalled) factory A factory scene (can be recalled)  EXAMPLES camera ccu scene recall factory 2 - Recalls the factory scene stored at index 2 RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 34 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 35
    RoboSHOT 12 USB Camera CCU Set  NAME camera ccu set - Sets and gets the CCU Settings  SYNOPSIS camera ccu set  DESCRIPTION Method used to sets the ccu values  OPTIONS auto_white_balance Sets auto white balance to {on/off} red_gain Sets
  • Vaddio RoboSHOT 12 USB | User Guide - Page 36
    down arrow moves down in the command history.  HISTORY EXPANSION The command history supports the expansion functionality from which previous commands can be recalled from within a single data size of 100 to the host at 192.168.1.1 RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 36 of 40
  • Vaddio RoboSHOT 12 USB | User Guide - Page 37
    RoboSHOT 12 USB System Factory‐Reset  NAME system factory-reset - Gets or sets factory reset status  SYNOPSIS system factory-reset {get|on|off}  DESCRIPTION Method used to get or set the factory reset status  OPTIONS get Get the current factory reset status on
  • Vaddio RoboSHOT 12 USB | User Guide - Page 38
    AND CE DECLARATION OF CONFORMITY - ROBOSHOT 12 USB CAMERA Compliance testing was performed to the installed and used in accordance with the instruction manual, may cause harmful interference to radio or modifications not expressly approved by Vaddio can affect emission compliance and could
  • Vaddio RoboSHOT 12 USB | User Guide - Page 39
    RoboSHOT 12 USB WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in
  • Vaddio RoboSHOT 12 USB | User Guide - Page 40
    Specifications and pricing are subject to change without notice or obligation. Vaddio, RoboSHOT, Tri-Synchronous, EasyUSB, EasyMic and RCLB are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0981 Rev B, SD: 69159.7 RoboSHOT 12 USB - Document
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
© 2015 Vaddio - All Rights Reserved.
RoboSHOT 12 USB Manual, Firmware Release 1.0.1 - Document Number 342-0981 Rev B
V
ADDIO
™
R
OBO
SHOT™
12
USB
C
AMERA
Enterprise-Class,
High Definition PTZ Conferencing Camera with simultaneous
USB 3.0, IP (H.264) Streaming and HDMI Outputs, Tri-Synchronous™ Motion and
Wide Angle 12X Optical Zoom Lens
RoboSHOT 12 USB Part Numbers:
999-9920-000
(North America)
999-9920-001
(International)
Installation and User Guide