Vaddio RoboSHOT 12 USB User Guide - Page 11

RoboSHOT 12 USB Telnet* Control Example The following *Telnet commands are available through the Ethernet Port.  Camera Home  Camera Pan (left, right and speed - real-time operation)  Camera Tilt (up, down and speed - real-time operation)  Camera Zoom (zoom in/out/stop and speed - real-time operation)  Camera Store Preset (Gets or Sets 12 presets with global relative PTZ [Tri-Sync] speed control to destination)  Camera Image (Gets or sets current image control values, sets in 1 of 3 CCU presets) (AWB or manual w/Red and Blue gain, BLC on/off, Auto Iris or manual with Iris value and Gain, Detail and Chroma)  Camera Sleep (Gets or sets standby power mode - camera has to us less power in this mode)  Exit (ends Telnet session)  Help (displays CLISH syntax)  History (command history)  Network Ping (send ICMP ECHO_REQUEST to network hosts)  Network Settings (Gets MAC address, IP address, Subnet Mask, Gateway and NTP server address)  Streaming (Method used to get or set the current streaming settings)  System Factory Reset  System Reboot  Version (system version information)  Exit *Please see the full and actual Telnet command list at the end of this manual. RS-232 Control The RoboSHOT has an API for control of the camera's operating functions over RS-232. Vaddio RoboSHOT Control Protocol is similar, but not identical to, the Sony® VISCA™ command set in order to be compatible with several popular control devices. Not all VISCA commands are supported and there are many Vaddio specific commands in the following Command and Inquiry Lists Built-in Webserver Control The RoboSHOT camera platform uses a Linux OS and has a built-in web server. The internal web pages will allow control of the attached camera via an Ethernet network connection. SO FAR The RoboSHOT camera has an embedded webserver for system configuration and control. A network connection is required for camera configuration, camera control and Telnet Next, for your reading enjoyment, a Software/OS Compatibility section and a Screen Shot tour has be prepared for the RoboSHOT 12 USB camera. SOFTWARE AND OS COMPATIBILITY The RoboSHOT 12USB will work with the following web browsers, soft codecs, computer operating systems and media players: Compatibility - Web Browsers: 1) Internet Explorer (IE 8 to 11) 2) Safari (Rev 6 and 7) 3) Chrome (the latest and current release - auto updating) 4) Firefox (the latest and current release - auto updating) UC Soft Client Compatibility: The RoboSHOT 12 USB is a standard USB Video Class (UVC) imaging device with native support in Windows, Mac OS, and Linux operating systems. Interoperability testing was conducted on some of the major UC clients to validate operations within a UC session. Below is a listing UC clients tested along with any findings observed. Please do not interpret this list as the only UC clients that work with the RoboSHOT 12 USB. The RoboSHOT 12 USB should work with any software application designed to interface with standard UVC device drivers. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 11 of 40