Vaddio RoboSHOT 12 USB User Guide - Page 6

RoboSHOT 12 USB Image: RoboSHOT 12 HD PTZ Camera Camera Front View with Feature Call-outs ① ② ⑤ ③ ⑥ ④ 1) Camera and Zoom Lens: This RoboSHOT model features a 12X optical zoom lens (12X in Super-Wide mode and 10X in normal mode) that is built around an Exmor 1/2.8-Type, high-speed, low noise image sensor with a total of 2.38 megapixels for exceptionally precise HD video image acquisition in a small to medium sized conference room. 2) Camera Support Arm: The RoboSHOT cameras use a single control arm for pan and tilt movements. Both ends of the cast control arm are anchored with silent and smooth BLDC (brushless DC) direct drive motors. These motors provide ultra-accurate and fast camera positioning and are capable of the slowest of crawls, which are suitable for on-air use. 3) IR Sensors: IR sensors are built into the front of the RoboSHOT to receive IR signals from the IR Remote Commander supplied with the camera. The IR sensors sit behind the Makrolon IR Window on the front of the base. 4) Multi-Color LED: The multi-colored LED indicates the use states of the camera:  Purple LED is for Boot-up and Standby modes.  Blue LED is for normal operation and is a power on, ready condition.  The blue LED will blink when the camera receives a valid IR command.  Solid red LED is to indicate a tally function illuminating when the camera is on-air.  Blinking red LED indicates a fault condition.  Yellow LED illuminates during a firmware update. 5) Logo: Really Cool Logo Badge (RCLB) is located on the IR Window. 6) Camera Base: Cast zinc alloy base for strength and stability, powder coated for toughness with fine texture. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 6 of 40