Vaddio RoboSHOT 12 USB User Guide - Page 7

RoboSHOT 12 USB Image: RoboSHOT 12 USB Rear Panel Connections. ① ④ ⑤ ② ⑥ ⑦ ③ 1) Power Connector: 12 VDC, 3.0 Amp power input on an EIAJ-04 connector with a positive center. 2) Network PoE+ RJ-45: The PoE+ Gb Ethernet port allows the camera to be powered from a PoE+ network switch or power injector, controlled from embedded web server with a web browser or through a Telnet session. It also will IP Video in a RTSP format with H.264 compression up to 1080p/30. Note: for RoboSHOT 12 USB Release 1.0.0, 1080p is the only active IP (H.264) streaming resolution available. More resolutions will be added in the next software releases. 3) USB 3.0 Port: This port will stream uncompressed UVC (USB Video Class) standard video up to 1080p. The camera will detect the connection to a USB 2.0 video port and provide standard resolution video to the host PC that USB 2.0 can handle (640x480, 360p/30, 240p/30, 320x240 and 180p). Many UC clients will not ask for more than standard resolutions such as these. 4) HDMI VIDEO SELECT: A rotary switch allows the user to choose the HDMI video output resolution. See the Switch Settings page for additional information. 5) Camera Setting DIP Switch: DIP switch settings for IR remote frequency, baud rate and image flip can be configured on these switches. See the Switch Settings page for additional information. 6) HDMI Video Output: This is the HDMI video output (what else can you say?). 7) RS-232 Port (Color Coded Blue): The RS-232 port accepts modified VISCA protocol for camera control over a Cat-5/5e/6 cable. RoboSHOT 12 USB - Document Number 342-0981 Rev B Page 7 of 40