Vaddio RoboSHOT 30 RoboSHOT 12 and 30 QUSB System Manual - Page 10
Camera Settings, Hd Video Select, Network Control Port, Rs-232 Port, Ez-power Video Port, Vdc - dvi
View all Vaddio RoboSHOT 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
RoboSHOT HD Cameras Image: RoboSHOT 12 and 30 Rear Panel Connections Rear panel connections are identical for both models (RoboSHOT 12 shown). ① ④ ② ⑤ ⑥ ③ 1) CAMERA SETTINGS: DIP switch settings for IR remote frequency, baud rate and image flip can be configured on these switches. See the Switch Settings page for additional information. 2) HD VIDEO SELECT: A rotary switch allows the user to choose the HD video output resolution. See the Switch Settings page for additional information. 3) NETWORK CONTROL Port: The Ethernet 10/100 port allows the camera to be controlled from embedded web server with a web browser or through Telnet session. 4) RS-232 Port The RS-232 port accepts modified VISCA protocol for camera control over a Cat-5e cable. This port also acts as an IR Forwarding port with the Quick-Connect SR or Quick-Connect DVI/HDMI interfaces, which allows the user to transmit 3rd party IR signals through camera to the head-end. 5) EZ-POWER VIDEO Port: The EZ-Power Video port supplies 24 VDC power to the camera and delivers HD video back to the Quick-Connect interface using high speed differential signaling over Cat-5e cable. 6) 36 VDC FOR CCU ONLY: The CCU power port is only used with Quick-Connect Universal CCU and is shipped with a dust cap inserted in the connector. The RoboSHOT QUSB systems do not use this connector. RoboSHOT HD Cameras - Document Number 342-0796 Rev A Page 10 of 68