Vantec UGT-ST350CB User Guide - Page 14
SATA/eSATA PCI Host Controller UGT-ST300 / SATA/eSATA PCI-Express Host
View all Vantec UGT-ST350CB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5.5. Connecting Drives: SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400): Internal SATA: Connect SATA cable to the Internal SATA port on the card. Connect the other end to the drive. External SATA: Connect eSATA cable to the External SATA port on the card. Connect the other end to the drive or enclosure. 2-Port eSATA PCMCIA CardBus (UGT-ST350CB): External SATA: Connect eSATA cable to either External SATA port on the CardBus. Connect the other end to the drive or enclosure. Installation 12
5.5. Connecting Drives:
SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host
Controller (UGT-ST400):
Internal SATA:
Connect SATA cable to the Internal SATA port on the card.
Connect the other end to the drive.
External SATA:
Connect eSATA cable to the External SATA port on the card.
Connect the other end to the drive or enclosure.
2-Port eSATA PCMCIA CardBus (UGT-ST350CB):
External SATA:
Connect eSATA cable to either External SATA port on the CardBus.
Connect the other end to the drive or enclosure.
Installation
12