Vantec UGT-ST644R User Guide - Page 16
To manually rebuild a RAID 1 virtual disk, Status, Functional, Degrade
 |
View all Vantec UGT-ST644R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
to initiate, resume, or complete the rebuild process. Spare physical disks are not supported. To manually rebuild a RAID 1 virtual disk 1. When a virtual disk is degraded, the Status of a virtual disk is changed from Functional to Degrade, as shown in Figure 11. Figure 11 Virtual Disk Properties: Degrade VD 2. Replace the faulty physical disk with an identical physical disk. Note: If an identical disk is unavailable, use a replacement physical disk or larger size or one with a slightly smaller size as determined the Gigabyte Rounding setting for the virtual disk. The 4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card detects the new physical disk and lists the device under Free Physical UGT-ST644R Page 16
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22
-
23
-
24
 |
 |
UGT-ST644R
Page 16
to initiate, resume, or complete the rebuild process. Spare physical
disks are not supported.
To manually rebuild a RAID 1 virtual disk
1.
When a virtual disk is degraded, the
Status
of a virtual disk is
changed from
Functional
to
Degrade
, as shown in Figure 11.
Figure 11 Virtual Disk Properties: Degrade VD
2.
Replace the faulty physical disk with an identical physical disk.
Note: If an identical disk is unavailable, use a replacement
physical disk or larger size or one with a slightly smaller size as
determined the Gigabyte Rounding setting for the virtual disk.
The 4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card detects
the new physical disk and lists the device under Free Physical