ViewSonic M2000 User Guide - Page 15

Input and Output Ports The illustrations below show the video and audio ports that you can use to connect Input devices (such as a cable or satellite set-top box, a camcorder, digital camera, VCR, etc.) to your Media Center, as well as Output devices (such as a TV, Plasma Display, PC Monitor, and audio receiver with speakers). Back of Media Center: WARNING: This switch is pre-set to the proper voltage for your region. DO NOT change this setting. Doing so could seriously damage the unit and void the warranty. Audio OUT: Digital audio coaxial port Analog audio port (L) Analog audio port (R) Digital audio optical port AC power connector Auxiliary Audio IN: Analog audio port (L) Analog audio port (R) IR Emitter USB 2.0 ports (2) Ethernet LAN RJ45 port Firewire1394a port Video & Audio IN: Analog audio port (R) Analog audio port (L) Composite Video port S-Video port Coaxial video/audio port Video OUT: VGA port (to PC monitor) S-Video port (to TV) DVI-I port (to PC monitor, Plasma display, etc.) NOTE: DVI = Primary Video Out; S-Video or VGA = Secondary Video Out. Cable WARNING: DO NOT Guide use the Cable Guide to lift or carry the Media Center. Doing so could damage the unit. Front of Media Center: Auxiliary Video & Audio IN (Connect a VCR, Digital Camera, Camcorder, Microphone, etc.) (R) Analog Audio port (L) Analog Audio port Composite Video port S-Video port Microphone USB 2.0 port Firewire 1394a (digital video and audio signal) Access Door 10 ViewSonic NextVision TM M2000 Digital Media Center