ViewSonic N4290p N4290p User Guide, English. G Region - Page 12
ViewSonic, N3290w/N4290p/N4790p
UPC - 766907300215
View all ViewSonic N4290p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display. 3. In case no signal is detected from your HDMI device, turn off the HDMI device and then on again. 4. To get an optimal viewing, it is advised to turn your DVD player to one of the following TV display standards:1280x720p@ 60hz (7)VGA Signal Input: Use the VGA signal cable to connect signals from a PC to the TV Input. Connect the PC audio cable supplied with the TV to the TV's PC Audio Input. Note: If no signal is present on the VGA screen, the TV will enter into standby mode automatically after 60seconds. ENGLISH ViewSonic 10 N3290w/N4290p/N4790p
2.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
3.
In case no signal is detected from your HDMI device, turn off the HDMI device and then
on again.
4.
To get an optimal viewing, it is advised to turn your DVD player to one of the following
TV display standards:1280x720p@ 60hz
(7)VGA Signal Input:
Use the VGA signal cable to connect signals from a PC to the TV Input.
Connect the PC audio
cable supplied with the TV to the
TV’s
PC Audio
Input.
Note: If no signal is present on the VGA screen, the TV will enter into standby mode
automatically after 60seconds.
ViewSonic
N3290w/N4290p/N4790p
10