ViewSonic PJ1065 User Manual - Page 10

Power Connection Be sure to use the correct supplied power cords depending on the power outlet to be connected to. Connect the AC inlet of the projector firmly to the power outlet with the power cord. CAUTION • Be careful when you handle the power cord. Always observe and follow the instructions in the accompanying manual "SAFETY INSTRUCTIONS". • Firmly connect the power cord. Do not use a loosened or unsafe power outlet or a malfunctioning contact. Power outlet Example of system setup Computer (desktop) AC inlet Power cord Computer (notebook) S-Video Tape Recorder Display Monitor Speaker with amplifier DVD Player NOTE: Computer (desktop) NOTE: • When connecting the projector to a notebook computer, set it so as to activate the RGB external image output (setting it to CRT display or to simultaneous LCD and CRT display). Fore more information, refer to the instruction manual of the notebook. Plug & Play This projector is compatible with VESA DDC 1/2B. Plug & play is possible by connecting to a computer that is compatible with VESA DDC (Display Data Channel). Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B compatible), or by connecting an optional DVI cable with DVI terminal (DDC 2B compatible). Plug & Play may not operate by any other connection. NOTE: • Plug & play is a system configured with peripheral equipment including a computer and display, and an operating system. • This projector is recognized as a plug & play monitor. Use the standard display drivers. Plug & play may not function properly with the computer to be connected. Use the RGB IN 2 terminal if plug & play does not function correctly. 8 ViewSonic PJ1065