ViewSonic PJ1065 User Manual - Page 14

Setup Menu The following adjustments and settings are possible when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (see Table 3, MENU SELECT). RGB IN 1 RGB IN 2 DVI VIDEO S-VIDEO COMPONENT VIDEO RGB IN 1 RGB IN 2 VIDEO S-VIDEO COMPONENT Table 4: Setup Menu Item BRIGHT CONTRAST V POSIT H POSIT H PHASE Adjustment: Dark Adjustment: Weak Adjustment: Down Adjustment: Left Description Light Strong Up Right DVI Adjustment: Left Right • Adjust to eliminate flicker. Adjustment: Small Large • The image may not be displayed correctly if the horizontal size is excessive. In such cases, press the RESET button, and initialize the horizontal size. Adjustment: Soft Adjustment: Light Clear Dark H SIZE SHARPNESS COLOR TINT Adjustment: Red Green • Valid only when NTSC or NTSC 4.43 signal is received. Dark Dark COLOR BAL R Adjustment: Light COLOR BAL B Adjustment: Light Select Image Aspect Ratio: ASPECT Select position of image: Press the button when 16:9 [ ] has been selected. Down→ Up (→Center ) Center→ Select Image Aspect Ratio: small[ ] Select position of image: Press the button when 16:9 [ ] / 4:3 small [ ] has been selected. Center→ Down→ Up (→Center ) • 4:3 small cannot be selected with the input of 720P or 1080i component. • 4:3 small may not be displayed correctly with some input signals. √ √ − − − √ 12 ViewSonic PJ1065